Manufacturer Number: Stamos Soldering 10021058
Stamos Soldering 's professional laboratory power supply is designed to convert alternating current into direct current of a selected voltage. This gives the ability to supply electrical power to various devices used for scientific purposes, industry or telecommunications. The versatility of the device is evidenced by three channels, each with a plus and minus output. If necessary, all of them can operate simultaneously.
The first two channels have three modes of operation:
The first two channels have three modes of operation:
- - independent - the channels operate independently of each other at 30 V and 5 A,
- - parallel - the current value increases to 10 A,
- - series - the current voltage reaches 60 V at 5 A,
Control over the operation of the power supply is provided by 4 easy-to-read LED displays. They show four-digit values relating to voltage and current and their units. In addition, the LEDs inform about the currently selected function. Convenient knobs and buttons are used for control. Thanks to them, you can precisely set the correct values, specify the operating mode and channel.
The safety of the user is taken care of by a special system that will turn off the power supply when it reaches too high a temperature. In addition, the equipment is quiet, which significantly affects the comfort of work. The attached handle makes it easy to transport the device, and rubber feet prevent it from slipping on the working surface.
Product features:
- - Versatility - three channels and three modes of operation,
- - Precise adjustment - knobs and buttons for smooth parameter setting,
- - Readability - four large LCD screens,
- - Safety - protection system against overheating,
- - Mobility - small size and handle for transport.
Technical parameters:
- - Model - S-LS-28
- - Part number - 10021058
- - Article condition - New
- - Display - LED
- - Power - 550 W
- - Voltage - 230 V
- - Output current - 0-5 A
- - Output voltage - 0-30 V
- - Operating temperature - 0-40°C
- - Storage temperature - 10-70°C
- - Operating relative humidity - 80%
- - Storage relative humidity - 70%
- - DC voltage adjustment range - Channel I/II 0-30 V / Channel III 5 / 3.3 / 2.5 V
- - Current adjustment range - Channel I/II 0-5 A / Channel III 3 A
- - Operation stabilization factor - CV ≤ 0.01% + 3 mV / CC ≤ 0.1% + 3 mA
- - Current stabilization factor - V: ≤ 0.01% + 5 mV / A: ≤ 0.1% + 10 mA
- - Resolution - 10 mV / 1 mA
- - Ripple - CV ≤ 2 mVrms / CC ≤ 3 mArms
- - Accuracy of parameter settings (25°C ± 5°C) - Channel I/II/III - ≤ 0.5% + 20 mV / ≤ 0.5% + 10 mA / ± 50 mV
- - Temperature coefficient - ≤ 150 ppm
- - Response time for voltage rise/drop/current (at 10% load) - 0-100 ms
- - Display accuracy - 3
- - Protection - OTP
- - Fuse - T5 A / 250 V
- - Ammeter - Yes
- - Voltmeter - Yes
- - Connector - 4 mm
- - Cooling - Fan
- - Power cord length - 1.2 m
- - Dimensions (DxSxW) - 38 x 25 x 15 cm
- - Weight - 10.6 kg
- - Shipping dimensions (DxSxW) - 49.5 x 39 x 28 cm
- - Shipping weight - 11.6 kg
Included:
- - S-LS-28 laboratory power supply
- - Power cord
- - Instruction manual EN
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
To install this Web App in your iPhone/iPad press
and then Add to Home Screen.
