Manufacturer number: Stamos Soldering 10021060
Stamos Soldering 's professional laboratory power supply is designed to convert alternating current into direct current of a selected voltage. This gives the ability to provide electrical power to various devices used for scientific purposes, industry or telecommunications industry. The usefulness of the equipment is due to the channel with a voltage of up to 30 V, an output current of up to 5 A and with plus and minus ports.
Control over the operation of the power supply is provided by 2 easy-to-read LED displays. They show four-digit values relating to voltage and current and their units. In addition, the LEDs indicate panel lock, active protection system and memory mode activated. A convenient dial and buttons are used for control. Thanks to them you can precisely set the correct values, determine the mode of operation.
The built-in memory function will greatly facilitate the work on the power supply. It is used to save and restore previous settings. With the help of this mode, the power supply will remember the initial and precise parameters, the inclusion/exclusion of the sound signal, the level of voltage and current, as well as whether the outputs are to be switched on/off.
The user's safety is taken care of by a special system that will shut down the power supply when it reaches too high a temperature. In addition, there is an overload protection system and a panel lock that prevents accidental change of settings. In addition, the equipment is quiet, which significantly affects the comfort of work.Rubber feet protect the equipment from slipping on the work surface.
Product features:
Stamos Soldering 's professional laboratory power supply is designed to convert alternating current into direct current of a selected voltage. This gives the ability to provide electrical power to various devices used for scientific purposes, industry or telecommunications industry. The usefulness of the equipment is due to the channel with a voltage of up to 30 V, an output current of up to 5 A and with plus and minus ports.
Control over the operation of the power supply is provided by 2 easy-to-read LED displays. They show four-digit values relating to voltage and current and their units. In addition, the LEDs indicate panel lock, active protection system and memory mode activated. A convenient dial and buttons are used for control. Thanks to them you can precisely set the correct values, determine the mode of operation.
The built-in memory function will greatly facilitate the work on the power supply. It is used to save and restore previous settings. With the help of this mode, the power supply will remember the initial and precise parameters, the inclusion/exclusion of the sound signal, the level of voltage and current, as well as whether the outputs are to be switched on/off.
The user's safety is taken care of by a special system that will shut down the power supply when it reaches too high a temperature. In addition, there is an overload protection system and a panel lock that prevents accidental change of settings. In addition, the equipment is quiet, which significantly affects the comfort of work.Rubber feet protect the equipment from slipping on the work surface.
Product features:
- - Practicality - memory mode
- - Precise adjustment - knobs and buttons for smooth parameter setting,
- - Readability - two large LCD screens,
- - Safety - overheat protection system, overload protection, panel lock,
- - Mobility - small size.
Technical parameters:
- - Model - S-LS-30
- - Part number - 10021060
- - Article condition - New
- - Display - LED
- - Power - 250 W
- - Voltage - 230 V
- - Operating temperature - 0-40°C
- - Storage temperature - 10-70°C
- - Working relative humidity - 0.8
- - Storage relative humidity - 0.7
- - DC voltage adjustment range - 0-30 V
- - Current regulation range - 0-5 A
- - Operating stabilization factor - CV ≤ 0.01% + 3 mV / CC ≤ 0.1% + 3 mA
- - Operating stabilization factor during load - CV ≤ 0.01% + 2 mV / CC ≤ 0.1% + 10 mA
- - Resolution - 10 mV / 1 mA
- - Ripple - CV ≤ 2 mVrms / CC ≤ 3 mArms
- - Accuracy of parameter settings (25°C ± 5°C) - ≤ 0.5% + 20 mV / ≤ 0.5% + 10 mA
- - Temperature coefficient - ≤ 150 ppm
- - Response time to voltage rise/drop/current (at 10% load) - 100 ms
- - Protection - OTP, OCP, OVP
- - Fuse - T3 A / 250 V
- - Connector - 4 mm
- - Power cord length - 1.2 m
- - Cooling - Fan
- - Ammeter - Yes
- - Voltmeter - Yes
- - Display accuracy - 3
- - Dimensions (DxSxW) - 27 x 11 x 16.5 cm
- - Weight - 4.5 kg
- - Shipping dimensions (DxSxW) - 33 x 20.5 x 25.5 cm
- - Shipping weight - 5 kg
Included:
- - Laboratory power supply S-LS-30
- - Power cord
- - Instruction manual EN
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
To install this Web App in your iPhone/iPad press
and then Add to Home Screen.
