Overhead crane with winch crane PROCAT 800 to 800kg

Manufacturer code: 10060013

The MSW electric gantry hoist will be ideal for large warehouses or indoor and outdoor areas. With a high-speed gantry reaching 13 m/min, loads can be carried even on a beam with curves, provided the radius of the curve is at least 1 m. The electric winch is equipped with a sturdy steel cable with a length of 12 m and a load capacity of 400 kg. It is made of CK45 steel and is resistant to twisting and wear, which contributes to its exceptional durability. Just use the pulley to increase the load capacity up to 800 kg. The lifting height will then be 6 m, and the lifting speed will be halved from 8 to 4 m/min. There is a safety lock on the hook. Thanks to the overload protection, the winch will work reliably for a long time, and the 1800 W motor will not overheat. The electromagnetic braking system will guarantee quiet operation. Easy access to the load from all sides will be possible with a 360° rotating hook The winch can be operated with a 2.4-meter wired remote control. The PROCAT 800 winch can be attached to steel beams 68 - 94 mm wide and at least 110 mm high. These can be wide-footed beams, T-beams or I-beams.

Product features:

• - Lifts weights up to 800 kg,
• - Easy access to the load, the hook can be rotated 360°,
• - Lifting speed of 8 m/min without and 4 m/min with hook,
• - Agile crane is also suitable for beams with curves,
• - Wired remote control 2.4 m long with tension reduction.

• - Part number - 10060013
• - Article condition - New
• - Model - PROCAT 800
• - Color - Blue
• - Voltage [V] - 230
• - Rope material - Ck45 steel
• - Gear lubricant type - EP
• - Electric motor - insulation - B
• - Crane motor - insulation - B
• - Electric motor - safety class - IP54
• - Electric motor - intermittent operation - S3 20% - 10 min
• - Overhead crane motor - safety class - IP20
• - Overhead crane motor - intermittent operation - S3 20% - 10 min
• - Load hook - Yes
• - Remote control - Yes
• - Clamp with hook - Yes
• - Rope length - 12 m
• - Cable from remote control - 2.4 m
• - Travel speed - 13 m/mn
• - Wire diameter - 5.1 mm
• - Motor - power - 1300 W
• - Rope pulling strength - 2000 kg
• - Crane motor - power - 540 W
• - Average lowering speed - one-way lift - 9.6 m/mn
• - Minimum curve radius - 1 m
• - Maximum lifting height - one-way lift - 12 m
• - Average lifting speed - with return roller - 4 m/mn
• - Maximum lifting capacity - one-way lift - 400 kg
• - Average lowering speed - with return roller - 4.8 m/mn
• - Maximum lift height - with idler roll - 6 m
• - Maximum lifting capacity - with return roller - 800 kg
• - Dimensions (DxSxW) - 49 x 41 x 41 cm
• - Weight - 35.5 kg
• - Shipping dimensions (DxSxW) - 53.2 x 48.2 x 49.2 cm
• - Shipping weight - 39.26 kg

• - Rope winch with gantry
• - Electric winch
• - Pulley