Overhead crane with winch PROCAT 1200 crane crane up to 990kg

Manufacturer code: 10060005

The MSW electric gantry hoist will be ideal for large warehouses or indoor and outdoor areas. With a high-speed gantry reaching 13 m/min, loads can be carried even on a beam with curves, provided the radius of the curve is at least 1 m. The electric winch is equipped with a sturdy 12m long steel cable with a load capacity of 600kg. It is made of CK45 steel and is resistant to twisting and wear, which contributes to its exceptional durability. Just use the pulley to increase the load capacity up to 990 kg. The lifting height will then be 6 m, and the lifting speed will be halved from 8 to 4 m/min. Thanks to the rope winch, the load will always be well secured. There is a safety lock on the hook. Thanks to the overload protection, the electric winch will work reliably for a long time, and the 1800W motor will not overheat. The electromagnetic braking system will guarantee quiet operation. Easy access to the load from all sides will be possible with a 360° rotating hook. The winch is operated with a 2.4-meter wired remote control. The PROCAT 1200 winch can be attached to a steel beam 68 - 94 mm wide and at least 110 mm high. These can be wide-footed beams, T-beams or I-beams.

Product features:

• - High load capacity of up to 990 kg,
• - The hook can be rotated 360°,
• - Lifting speed of 8 m/min without and 4 m/min with hook,
• - The maneuverable crane is also suitable for beams with curves,
• - Wired remote control 2.4 m long with tension reduction.

• - Part number - 10060005
• - Article condition - New
• - Model - PROCAT 1200
• - Voltage [V] - 230
• - Rope material - Ck45 steel
• - Gear lubricant type - EP
• - Electric motor - insulation - B
• - Crane motor - insulation - B
• - Electric motor - safety class - IP54
• - Electric motor - intermittent operation - S3 20% - 10 min
• - Overhead crane motor - safety class - IP20
• - Overhead crane motor - intermittent operation - S3 20% - 10 min
• - Load hook - Yes
• - Remote control - Yes
• - Clamp with hook - Yes
• - Rope length - 12 m
• - Cable from remote control - 2.5 m
• - Travel speed - 13 m/mn
• - Rope diameter - 5.6 mm
• - Motor - power - 1800 W
• - Rope pulling strength - 3000 kg
• - Crane motor - power - 540 W
• - Average lowering speed - one-way lift - 9.6 m/mn
• - Minimum curve radius - 1 m
• - Maximum lift height - one-way lift - 12 m
• - Average lifting speed - with return roller - 4 m/mn
• - Maximum lifting capacity - one-way lift - 600 kg
• - Average lowering speed - with return roller - 4.8 m/mn
• - Maximum lift height - with idler roll - 6 m
• - Maximum lifting capacity - with return roller - 990 kg
• - Dimensions (DxSxW) - 54 x 42 x 45.5 cm
• - Weight - 51.5 kg
• - Shipping dimensions (DxSxW) - 62 x 51.5 x 54 cm
• - Shipping weight - 54.68 kg

• - Rope winch with gantry
• - Electric winch
• - Pulley