S-PLASMA 125H SELECTION 125A plasma cutter

Manufacturer name: S-PLASMA 125H

The plasma cutter from German welding market leader STAMOS GERMANY is capable of reaching a maximum cutting current of 125 A. This will enable efficient processing of such materials as steel, nickel, aluminum, copper and other electrically conductive metals. As a result, the equipment will find application in many industries requiring precisely cut metal parts.

The device uses advancedIGBT technology . It uses special bipolar transistors with an isolated gate to ensure reliability. Fast switching parameters and low risk of short-circuits are guaranteed by the three-phase semiconductor element. The IGBT also affects the small size of the device, while maintaining high performance.


Product features:

• - Functionality - for cutting steel and other electrically conductive metals (titanium, copper, brass, etc.).
• - Performance - modern IGBT technology and non-contact arc ignition ensure smooth and stable operation,
• - Easy operation - a large knob and switches allow precise setting of working parameters without removing gloves,
• - Legibility - the LED display shows the amperage even in dark rooms, and the LEDs indicate if the voltage is too high or if the air pressure drops,
• - Easy transportation - convenient handle, small size and weight allow you to easily carry the cutter as needed,
• - Convenience - long 5-meter and 4-meter cables guarantee freedom of movement during cutting and facilitate work in hard-to-reach places,
• - Safety - special overheating protection system and built-in fan to ensure heat dissipation,

• - Model - S-PLASMA 125H
• - Part number - 2067
• - Article condition - New
• - Rated input voltage - 400 V, 3-phase
• - Mains frequency - 50 / 60 Hz
• - Rated input current - 22 A
• - Maximum input current - 31 A
• - Rated input power - 15.4 kVA
• - Maximum input power - 21.8 kVA
• - Idling voltage - 300 V
• - Cutting current - 10 - 125 A
• - Rated duty cycle - 60%
• - Cutting current in 100% duty cycle - 96.8 A
• - Cutting current in 60% duty cycle - 125 A
• - Gas Post-Flow Time - 2, 10, 60 s
• - Cooling of the housing - Fan
• - Cooling method of the chuck - Air
• - Length of mass cable - 3 m
• - Length of plasma holder - 5 m
• - Length of air hose - 4 m
• - Length of power cord - 3.8 m
• - Maximum thickness of cut material - 34 mm
• - Cutting width - 1.4 mm
• - Required air flow - 250 l/min
• - Air pressure - 7 bar
• - Insulation class - F
• - Degree of protection - IP21S
• - Construction in accordance with - EN 60974-1; EN 60974-10
• - EG compliance - CE
• - Dimensions (DxSxW) - 63.5 x 27 x 40 cm
• - Weight - 33.9 kg
• - Shipping dimensions (DxSxW) - 74 x 38 x 52 cm
• - Shipping weight - 34.8 kg

• Plasma cutting - thanks to the current of up to 125 A, the device will effortlessly cut such metals as, iron, stainless steel, cast iron, copper, or aluminum. The air pressure is infinitely adjustable, allowing precise control of the plasma jet. Non-burning of the material, little distortion and a smooth cutting gap are some of the advantages that come from using the Stamos Germany multifunctional device.

Features of the device:

• -2T/4T, or two-bar and four-bar. When using the former, pressing the button will initiate the cut, and releasing it will interrupt the process. With four-touch, the user does not need to hold the buttons continuously, as pressing and releasing the button starts or stops the work,
• - Non-contact plasma arc ignition allows the user to start cutting without contact with the workpiece, which reduces wear on consumable parts and improves productivity,
• - Gas Post-Flow Time, or gas flow control. Prevents oxidation of the weld,

• - Plasma cutter
• - Plasma holder with cable - 5 m
• - Plasma holder consumable parts
• - Ground wire with clamp - 4 m
• - Air hose - 4 m
• - Pressure reducer
• - Pressure gauge
• - Instruction manual EN