S-PLASMA 85H SELECTION 85A plasma cutter

Manufacturer name: S-PLASMA 85H

The plasma cutter from German welding market leader STAMOS GERMANY is capable of reaching a maximum cutting current of 85 A. This will enable efficient processing of such materials as steel, nickel, aluminum, copper and other electrically conductive metals. As a result, the equipment will find application in many industries requiring precisely cut metal parts.

The device uses advancedIGBT technology . It uses special bipolar transistors with an isolated gate to ensure reliability. Fast switching parameters and low risk of short-circuits are guaranteed by the three-phase semiconductor element. The IGBT also affects the small size of the device, while maintaining high performance.


Product features:

• - Functionality - for cutting steel and other electrically conductive metals (titanium, copper, brass, etc.).
• - Performance - modern IGBT technology and non-contact arc ignition ensure smooth and stable operation,
• - Easy operation - large knobs allow precise setting of the cutting current, without the need to remove gloves,
• - Legibility - LED display shows the current even in dark rooms,
• - Easy transportation - comfortable handle, small size and weight allow you to easily carry the cutter as needed,
• - Convenience - long 5-meter and 4-meter cables guarantee freedom of movement during cutting and facilitate work in hard-to-reach places,
• - Safety - special overheating protection system and built-in fan to guarantee heat dissipation,

• - Model - S-PLASMA 85H
• - Part number - 2044
• - Article condition - New
• - Rated input voltage - 400 V, 3-phase
• - Mains frequency - 50 Hz
• - Rated input current - 13.2 A
• - Maximum input current - 18.6 A
• - Rated input power - 8.6 kVA
• - Maximum input power - 13.2 kVA
• - Idling voltage - 280 V
• - Cutting current - 20 - 85 A
• - Rated duty cycle - 60%
• - Cutting current in 100% duty cycle - 65.8 A
• - Cutting current in 60% duty cycle - 85 A
• - Gas flow time - 2 - 15 s
• - Maximum cut thickness - 27 mm
• - Cutting width - 1.2 mm
• - Required air flow - 175 l/min
• - Working pressure of air - 5.5 bar
• - Plasma holder - 5 m
• - Ground wire with clamp - 4 m
• - Air nozzle - 4 m
• - Power cable - 3.8 m
• - Cooling of the housing - Fan
• - Cooling method of the holder - Air
• - Power factor - 0.93
• - Efficiency (under rated conditions) - ≥ 0.85
• - Insulation class - F
• - Design in accordance with - EN 60974-1 / EN 60974-10
• - EG compliance - CE
• - Degree of protection - IP20 s
• - Dimensions (DxSxW) - 55 x 37 x 21 cm
• - Weight - 20.1 kg
• - Shipping dimensions (DxSxW) - 65 x 36.5 x 44 cm
• - Shipping weight - 27.6 kg

• Plasma cutting - thanks to the current of up to 85 A, the device will seamlessly cut such metals as, iron, stainless steel, cast iron, copper, or aluminum. The air pressure is infinitely adjustable, allowing precise control of the plasma jet. Non-burning of the material, little distortion and a smooth cutting gap are some of the advantages that come from using the Stamos Germany multifunctional device.

Features of the device:

• -2T/4T, or two-tap and four-tap. When using the former, pressing the button will initiate the cut, and releasing it will interrupt the process. With four-touch, the user does not need to hold the buttons continuously, as pressing and releasing the button starts or stops the work,
• - Non-contact plasma arc ignition allows the user to start cutting without contact with the workpiece, which reduces wear on consumable parts and improves productivity,
• - Gas Post-Flow Time. Prevents oxidation of the weld,

• - S-PLASMA 85H cutting machine
• - Cutting handle with cable - 5 m
• - Ground wire with clamp - 4 m
• - Air nozzle - 4 m
• - Pressure regulator
• - Pressure gauge
• - Components for plasma holder
• - Instruction manual EN