Winch car winch off road remote control rope 28 m pulling capacity 4310 kg + Blocking 8 T

Manufacturer number: MSW 10060663

Powerful winch from the German brand MSW designed for pulling vehicles or other objects out of difficult areas. It will work well in mountainous areas or when driving off-road. It is perfect for large, heavy vehicles, trailers, boats or snowplows. It can also be used on farms or in forestry when removing tree trunks or logs, for example.

The 5.5 hp (4,000 watt) motor, along with a large drum and strong steel cable, achieves a pulling force of 9,500 lbs (4,310 kg). In addition, the DC design makes it easy to quickly and easily extract a vehicle from a ditch or other off-road obstacle.

A three-speed planetary gearbox (forward gear, reverse gear, and a manual clutch for fast rope deployment) allows the power transmission to be regulated by a special gearbox. The reduction ratio is 265:1. In turn, the intermittent duty cycle allows the engine to operate on an interval basis, so it does not reach its highest temperature.

To increase the durability of the device, the kit includes a steel rope (28 m in length / 9.5 mm in diameter), which, thanks to the four-path guide, is resistant to most mechanical damage and even during frequent changes in the pulling angle. Safety is the responsibility of the automatic braking system, which will hold the pulled object, even if the electricity runs out. In addition, the design of the winch is resistant to overloading and rain, snow or dirt.


Product features:

• - Performance - the 4,000-watt motor generates a pulling force of up to 4,310 kg,
• - Speed - a pull of 7.8 m/min,
• - Precision - Three-speed gearbox with a reduction ratio of 256:1,
• - Durability - strong steel rope,
• - Safety - protection against overheating, overloading and automatic braking system,
• - Convenience - Two remote controls (wireless and wired) and moisture and dirt resistant design.

• - Model - PROPULLATOR 9500-A
• - Part number - 10060663
• - Article condition - New
• - Housing material - Steel
• - Rope material - Steel
• - Motor power - 5.5 hp / 4000 watts
• - Voltage - 12 volts
• - Motor type - DC series motor
• - Duty cycle - Intermittent
• - Transmission - 3-stage planetary gearbox
• - Gear ratio - 11.0423611111111
• - Pulling force - 4310kg / 9500lbs
• - Pulling speed - 7.8 m/min
• - Rope length - 28 m
• - Rope diameter - 9.5 mm
• - Rope protection system - 4-stage guide
• - Drum diameter - 64 mm
• - Braking system - Automatic
• - Clutch type - Slip ring
• - Remote control type - 1 x wired 1 x wireless
• - Range of wireless remote control - 30 m
• - Pulley - 1 x 8 t
• - Dimensions (DxSxW) - 54.50 x 16.80 x 15.50 cm
• - Weight - 32.60 kg
• - Shipping dimensions (DxSxW) - 61.00 x 34.00 x 26.00 cm
• - Shipping weight - 38.50 kg

• - Winch,
• - Control box with wires,
• - Wired remote control,
• - Wireless remote control
• - 4-path roller rope guide,
• - Pulley (8 t)
• - Hook,
• - Mounting accessories,
• - EN manual.