Vertical concrete drill rig 152 mm 2880W MSW-DDM152

Manufacturer number: MSW 10060437

The MSW-DDM152 professional drilling machine will be suitable for processing hard materials such as brick, concrete and stone thanks to its robust construction. The 2880-watt motor guarantees efficient operation and a drilling speed of up to 1200 rpm. A convenient T-handle allows you to adjust the depth of drilling, and the guide provides smooth up and down movement from 0 - 510 mm.

To increase the efficiency of work, the drills are equipped with a special connector and hose, which can be connected to an external device responsible for wet work. This will extend the life of the crowns and reduce the risk of damage to the workpiece. Diamond crowns with diameters up to 152 mm are suitable for the device.

The drill is also suitable for manual work, just disassemble it from the base. Thanks to the placement of the switch in the handle and the installation of a special arm bracket, using the device in this mode is comfortable. An on/off switch lock is also used to facilitate continuous operation.

The safety of working on the drill is ensured by the PRCD (residual current device) module, which prevents the machine from turning on in the event of a short circuit. It also ensures that the machine will not start uncontrollably when connected to a power source.

Product features:

• - Reliability - robust design allows wet and dry work,
• - Multitasking - ability to drill in a variety of hard materials such as brick, concrete, reinforced concrete and stone,
• - Versatility - compatibility with diamond drills up to 152 mm in diameter,
• - Convenience - manual operation mode, arm support, on/off switch lock.
• - Safety - built-in PRCD module.

• - Model - MSW-DDM152
• - Part number - 10060437
• - Housing material - Aluminum, steel, plastic
• - Power - 2880 W
• - Voltage/frequency - 230V/50Hz
• - Sound pressure - 70 dB(A)
• - Sound power - 85 dB(A)
• - Max. drilling diameter - 152 mm
• - Drill attachment diameter - 1 1/4"
• - Water hose connection diameter - 1/2"
• - Length of water hose - 3.1 m
• - Max. speed (no load) - 1200 rpm
• - Guide range - 0-510 mm
• - Dry and wet drilling - Yes
• - PRCD module - Yes
• - Possibility of manual operation - Yes
• - Power cord length - 3.2 m
• - Dimensions (DxSxW) - 37.5 x 35.5 x 102 cm
• - Weight - 13.35 kg
• - Shipping dimensions (DxSxW) - 33 x 32 x 90 cm
• - Shipping weight - 16.4 kg

• - Concrete drill rig
• - Water hose 3.1 m
• - Rotating handle
• - Allen wrenches - 3 pcs.
• - Rear guide handle
• - Anchor bolt
• - Carbon brushes - 2 pcs.
• - Power cord 3.2 m with PRCD safety module
• - Instruction manual EN